Why does playback time differ from my estimate?
Before changing the formula, check which clock you are reading. Media progress, remaining playback and time spent in a session answer different questions.
These are constructed planning examples, not measurements of a particular player. They assume continuous playback without seeking, buffering or adverts unless stated. Your player may label its clocks differently; this site cannot read that display.
1. The remaining time looks too short
You enter a remaining-time figure, divide it by the speed, and get a finish time much earlier than the player suggests. You may have adjusted an already adjusted value.
Pause and identify the full original duration and current position on the media timeline. If changing speed also changes a separate remaining-time counter while paused, that counter is speed-adjusted; do not treat it as original media duration.
A 60-minute recording plays for ten real minutes at 2×. With no skips or interruptions, its original timeline has reached 20:00, leaving 40 minutes of media. You then choose 1.25×: the remaining playback is 32 minutes, not (60 − 10) ÷ 1.25 = 40 minutes. If the player already shows 32 minutes remaining, dividing that by 1.25 again gives an incorrect 25 minutes 36 seconds.
60 − (10 × 2) = 40 min 40 ÷ 1.25 = 32 min
In the audiobook planner, enter a total of one hour, completed timeline progress of twenty minutes, and speed 1.25×. Alternatively enter forty minutes as the remaining content and leave progress at zero. Do not subtract twenty minutes in both places.
Reproduce the remaining-time calculation2. One average speed gives the wrong total
You play half a recording quickly and the other half slowly, but dividing the full length by the average of the two speed settings gives a different answer.
Split the original media duration at every rate change. Thirty minutes at 2× takes fifteen real minutes; thirty minutes at 1× takes thirty. Together they take forty-five minutes. The simple average, 1.5×, would incorrectly predict forty.
30 ÷ 2 + 30 ÷ 1 = 45 min 60 ÷ 45 = 1.333333…× 45 + 8 = 53 min
The equivalent constant rate is total original duration divided by total playback: 60 ÷ 45 = 1.333333…×. Two pauses lasting eight minutes altogether bring the session to fifty-three minutes. Pause time stays in real minutes; never divide it by the playback rate.
In Add Video Durations, paste these two lines and set the automatic between-item break to zero. The playback total is 00:45:00. Add the eight minutes separately: there is only one boundary between two listed segments, so the automatic break count would not represent two actual pauses.
30:00 @2 30:00 @1Reproduce the mixed-speed calculation
3. Displayed rows differ from the total by seconds
A sum of the displayed durations can disagree with the displayed total even when the speeds and inputs are correct. This is a rounding difference, not extra playback.
For lessons of 38:40, 52:10 and 27:50 at 1.5×, the rounded rows are 25:47, 34:47 and 18:33. The final total is 1:19:07. Those rows happen to add up correctly, but this does not hold for every queue.
Try three one-second clips at 1.5×. Each lasts two-thirds of a real second and displays as one second. Adding the three displayed values gives three seconds; adding the exact values first gives two seconds.
round(1 ÷ 1.5) × 3 = 3 s round((1 + 1 + 1) ÷ 1.5) = 2 s
Enter 00:01 on three separate lines in Add Video Durations, select 1.5×, and set breaks to zero. Expect a 00:00:02 playback total. Use the calculated total rather than adding rounded row labels; round only after combining the unrounded values.
Read the precision and rounding rulesReference and correction notes
The HTML Standard defines currentTime and duration in seconds on the media timeline, and playbackRate as a multiple of normal speed. It does not determine every service’s remaining-time label. The arithmetic and diagnostic examples above are our own.
Still seeing a mismatch? Include the original duration, timeline position, rate changes, pauses and exact result when reporting it. Send a correction report